APT Industries - Insulated Panels, Air Washers, Custom Air Handling & More

CSS Drop Down Menus Css3Menu.com


  • APT-O-LITE Panels are constructed of a rigid 1 1/2", 2", and 3" thick core of 2 1/2-3 lb. density U.L. Class I polyisocyanurate/polyurethane sandwiched between two outer skins of 0.032" (minimum) embossed aluminum.
  • The polyurethane core is expanded-in-place vertically from the bottom of the panel to ensure a completely purged core, free of any voids, for maximum panel performance.
  • The closed cell foam insulation is non-absorptive and will not support mold or mildew growth.
  • Other gauges and combinations of smooth aluminum, stainless steel, galvanized steel, paint-grip steel, or pre-finished metal may be used as panel skins.
  • The panels are joined by no-thru metal extruded aluminum structural members, specifically designed to ensure an insulated, air-tight joint while simultaneously reinforcing the panels for high pressure and high loading applications.
  • All panel joints are sealed air and watertight with a specially formulated silicone sealer and will be mechanically fastened with drill point screws or pop rivets.
  • Where sound absorption is required, panel surfaces may be acoustically treated by the addition of a 2" thickness of acoustical fiber enclosed in a perforated aluminum liner.

For outdoor installations, a one-piece blanket membrane roofing system, sized to cover the entire enclosure, can be provided. The roofing system will include all necessary adhesives, sealers, and trim pieces as required for a complete installation by the contractor.

A complete package including piece-marked panels, extruded joiners, trim angles, fasteners, sealer, and detailed erection drawings is provided. For applications requiring additional structural reinforcement, structural supports can be recommended for installation by the contractor.

APT Industries
Phone: 704 - 598 - 9100

Home || About Us || Products || Services || Capabilities || Photo Gallery || Contact Info. || Site Map

Copyright © 2000-2020 — APT Industries - Charlotte, NC    
Custom Design & Fabrication of Industrial/Commercial Equipment such as: Air Washers - Evaporative Coolers - Custom Air
Handling Units - Foam Panel Enclosures - Foam Panel Duct - Tanks - Spray Piping - Moisture Eliminator Blades - Access Doors - Vane Rail

Acoustic Fan Enclosure Air Washer Unit Flanged Mist Eliminator Section Acoustic Fan Enclosure Flanged Mist Eliminator Section